Relay Shield for Particle v3.1
Description :
With your Core / Photon, you can already easily interact with your environment. The numerous inputs / outputs (GPIO) allows you to control relays ... but are you just trying to get your son and soldering iron to make prototyping.
Well, here's a ready-to-use interface that allows you to directly control 4 relays without taking the head. What order from high voltage devices anywhere in the world.
This product requires a separate power supply (see accessory) to power the relay. The good news is that your Core / Photon will also be powered in this way.
The power supply plugs or through the standard jack plug or directly soldered on two pads + and - (right next to the Jack connector).
Note: This product is not suitable for high power control ... do not plug dessuss radiator !!! (see data sheet for more information).
Content: contains only the shield relay (Core / Photon and power cord to the present illustrative purposes)
Warning
Working under high voltage (electrical distribution circuit) presents a shock hazard that can lead to death. If you do not have the skills or knowledge necessary not hesitate to call a professional or competent person.
Technical specifications
- Version 3.1
- Operating voltage: 7 to 15V DC (see our blocks of power supplies)
- Power consumption: 150mA minimum to 290mA (9V DC)
- Maximum relay Voltage: 250V AC (alternating)
- Maximum current: 10 Amp 250V (according to the technique of the relay sheet)
- Relay Model: Panasonic JS1-5V-F (datasheet)
- Relay Normally Open.
- Relais two directions: thus a common contact NO contact + one + one normally closed contact)
- Dimensions: 90mm x 84mm, height 20mm
- Weight: 100g
